If you’re unsure how to go about installing a fence, here are a few tips. The first step is to make sure the posts are spaced at least 8 feet apart. Depending on your property, you may want to use string lines to determine the location of corner posts. Make sure the rails are installed flush with the rail faces, too. Finally, make sure the rails extend to the house. After you’ve completed these steps, you’ll be well on your way to a fence that you’ll be proud of.
Next, you’ll need to mark the location of fence posts. Place fence stakes, approximately 18 inches apart, at the starting and ending points of the fence. Place stakes a few feet beyond these points so that the strings will intersect at the corners. Once these steps are complete, you’ll be ready to install your fence. You’re almost finished! After you’ve marked where to place the posts, you can proceed to the next step.
Once you’ve determined the course of your fence, you’re ready to install the fence. Next, you’ll need to mark the locations of the fence posts and rails. You can mark these locations by calling the 811 service. Be sure to check the location of underground pipes, utilities, and other objects before you start digging. Make sure your fence will not cross over another property. After you’ve made sure you’ve marked the posts and rails, you can install the fence.
Another important tip for installing a fence is the proper distance. It’s important to keep in mind that different properties may have different distances from each other’s property lines. Depending on the terrain, you may need to build a fence in a different place. However, the best distance to build your fence is the distance from the property line. It’s also important to keep in mind the guidelines of your Home Owner’s Association.
Choosing a leveling technique is another crucial step in installing a fence. While using a string guide for a single post is a quick and easy way to do this, you can also use a sharpshooter shovel to level the ground. Use a concrete mix for fast-setting posts, such as Quikrete Fast-Setting Concrete Mix. Once mixed properly, the concrete should set within twenty to forty minutes.
Once you know the exact location of the property lines, you can move on to the next step of installing the fence. If the fence is located along the property line, you should get a property survey, or consult with the local assessor’s office to verify the location of underground lines. If the fence is located too close to a neighbor’s property line, it could be illegal to build. Moreover, some towns may require a fence plan before approving it. Form more details ask a local fence company near you.